Lines Matching refs:after
381 Allow using ":" commands after an operator. Could be used to implement a new
391 command right after it. Thus ":confirm if x | edit | endif" no longer works,
598 \& match only when branch before and after it match
611 \%>23l match after line 23
612 \%23c, \%<23c, \%>23c match in/before/after column 23
613 \%23v, \%<23v, \%>23v match in/before/after virtual column 23
943 with two ASCII characters or an icon. The line after it can be highlighted.
1089 without modification. Useful for doing "gf" on the name after an include or
1190 mark is just after the line. |gi|
1245 come after the message. And don't do 'showmatch'.
1386 BufWinEnter Triggered when a buffer is displayed in a window, after using
1497 writing a new shell script, after adding "#!/bin/csh".
1643 since no syntax is defined after this command.
1746 when 'wak' changed after creating the menus.
1747 - Setting 'wak' after the GUI started works.
1992 When typing CTRL-D in Insert mode, just after an autoindent, then hitting CR
2203 colors after changing "t_Co". (Steve Wall)
2283 When 'verbose' is set, the header from ":select" was put after the last
2302 was done after trying to remove the string. Now for ":set opt+=val" and ":set
2308 Unix: Changed the order of libraries: Put -lXdmcp after -lX11 and -lSM -lICE
2309 after -lXdmcp. Should fix link problem on HP-UX 10.20.
2362 If a substitute string has a multibyte character after a backslash only the
2445 Adding a space after a help tag caused the tag not to be found. E.g., ":he
2458 When inserting a special key as its name ("<F8>" as four characters) after
2513 When doing wildcard completion, a directory "a/" sorted after "a-b". Now
2741 When doing a replace with the "c"onfirm flag, the cursor was positioned after
2742 the ruler, instead of after the question. With a long replacement string the
2801 included the character after the word.
2808 from redrawing the cursor after each call to gui_write() to only update it at
2816 line. Now keep the space after the Tab.
2823 character just after the line.
2832 Select mode. Insert mode wasn't restarted after overwriting the text.
2859 - 'cindent' gave too much indent to a line after a "};" that ends an array
2862 - A case statement inside a do-while loop was used for indenting a line after
2916 until after typing it. Now do this right away when typing it.
2938 Had to hit return after selecting an entry for ":ts".
2940 The message from ":cn" message was sometimes cleared. Now display it after
3029 after it. A ":set" command in the buffer menu set w_set_curswant. Now don't
3183 just after the character.
3216 The ":s" command didn't allow flags like 'e' and 'i' right after it.
3356 When using 'showbreak' a TAB just after the shown break would not be counted
3394 When looking for the file name after a match with 'include' one character was
3627 In menu files ":scriptencoding" was used in a wrong way after patch 6.1a.032
3701 Solution: Don't delay just after wait_return() was called. Added the
3750 Solution: Reset emsg_silent after calling emsg() in do_one_cmd().
3824 Solution: Always see a "$" as end-of-line after "\v". Do the same for "^".
3860 Problem: Using ":source! file" doesn't work inside a loop or after
3977 Sometimes after getting focus a mouse movement is interpreted like
4044 Solution: Update the ruler after executing the autocommands.
4074 the "$" doesn't update syntax highlighting after it.
4205 from the vimrc script, the shell prompt is after the message.
4252 Problem: "." doesn't work after using "rx" in Visual mode. (Charles
4258 Problem: In a C file, using "==" to align a line starting with "* " after
4274 cursor is after the end-of-line, moves the cursor left. (Yegappan
4302 Solution: Check the cursor position after deleting a line. (Serguei)
4397 Problem: Using undo after executing "OxjAxkdd" from a register in
4410 special character after a directory with a shorter name.
4451 Solution: Add the slash after expanding the directory to an absolute path.
4591 Recognize "\<" and "\>" after removing "\V".
4705 Problem: Mac: compilation problems in ui.c after patch 6.0.145. (Axel
4798 Solution: Don't skip matches after joining two lines.
4809 Problem: When printing double-width characters the size of tabs after them
4811 Solution: Correctly compute the column after a double-width character.
4815 Problem: With 'keymodel' including "startsel", in Insert mode after the end
4821 Problem: CTRL-Q doesn't replace CTRL-V after CTRL-X in Insert mode while it
4913 Don't change the indent after inserting in Visual linewise mode.
4919 Solution: Initialize the sign icons after initializing the GUI. (Vince
4927 Solution: Redisplay the size of the selection after showing the mode.
4950 Problem: When 'virtualedit' is set, col(".") after the end of the line
4992 Problem: Multi-byte: could use iconv() after calling iconv_end().
4994 Solution: Stop converting input and output stream after calling iconv_end().
5058 Solution: Force a redraw of the cursor after CTRL-^.
5128 Solution: Call s:EditDir() for each window after starting up.
5150 Problem: When 'virtualedit' is set and using autoindent, pressing Esc after
5160 Solution: Set the window variables after splitting the window.
5210 Solution: Check for multibyte character before and after the breakpoint.
5211 Don't insert a space before or after a multibyte character when
5218 Problem: The ":" used as a motion after an operator is exclusive, but
5239 Solution: Allow using "\{min,max}" after an atom that can be empty if there
5265 with two spaces after the middle "*" doesn't align properly.
5278 Problem: Using "A" to append after a Visually selected block which is after
5306 after it. (Charles Campbell)
5373 Problem: When 'insertmode' is set, after "<C-O>:edit file" the next <C-O>
5399 autocommand, after the dialog for permissions changed outside of
5401 Solution: Reset need_mouse_correct after checking timestamps.
5413 Problem: MS-DOS: after editing the command line the cursor shape may remain
5415 Solution: Reset the cursor shape after editing the command line.
5513 Problem: Win32: ":hardcopy" doesn't work after ":hardcopy!". (Jonathan
5520 Problem: multibyte: after setting 'encoding' the window title might be
5551 Solution: Set the form size after handling a resize event.
5577 Problem: Completion after ":language" doesn't include "time". (Raul Segura
5603 Problem: GTK: after patch 6.1a.011 resizing with the mouse doesn't always
5674 Solution: Move the translations to a separate file, which is sourced after
5788 Solution: Redraw the text under and after the cursor.
5794 deletes a space after the sentence.
5836 Solution: Find the full global match even after a partly local match.
5924 Problem: Win16: Can't compile after patch 6.1b.025.
5956 Problem: When using a count after a ":s" command may get ml_get errors.
5963 Problem: After sourcing mswin.vim, when using <C-S-Right> after
5972 Solution: Reset need_start_insertmode after editing the file.
6273 The file selector's scrollbar colors are not set after doing a ":hi Scrollbar
6400 Win32: The cursor position was incorrect after changing cursor shape.
6414 using the line count including what matched after the "\ze".
6465 Problem: Win32: after a ":popup" command the mouse pointer stays hidden.
6575 Solution: Append a NUL after the drive name. (Vince Negri)
6579 Problem: col("'>") returns a huge number after using Visual line mode.
6615 "VAR=val" argument after "env" isn't ignored. PHP scripts are not
6644 Problem: When CTRL-N is mapped in Insert mode, it is also mapped after
6645 CTRL-X CTRL-N, while it is not mapped after CTRL-X CTRL-F.
6647 Solution: Don't map CTRL-N after CTRL-X CTRL-N. Same for CTRL-P.
6665 Solution: Update the cursor position after redrawing the selection.
6702 Solution: Recompute the folds after reloading the file.
6758 Problem: When skipping commands after an error was encountered, expressions
6760 Solution: Skip the expression after an error. (Servatius Brandt)
6851 selection that ends just after a tab doesn't include that tab in
6864 Solution: Ignore comments when checking if the indent doesn't increase after
6894 Problem: When a file is reloaded after it was changed outside of Vim, diff
6902 Solution: Restore dollar_vcol after displaying the matching cursor position.
6966 the selected block is after the end of some lines the wrong text
7143 Solution: Don't continue the line after the $ has been displayed and the
7275 Solution: Go to Normal mode again after the ":drop" command.
7321 after ":if 0". (Servatius Brandt)
7342 Solution: Replace tabs with spaces after converting a line to HTML. (Preben
7471 Solution: Also check for an empty match to start just after a previous
7490 Solution: Don't use the '[ mark after it has become invalid.
7505 Problem: Win32: Can't compile with Python after 6.1.162.
7526 with CTRL-V just after auto-indenting removes the indent. (Shlomi
7748 Problem: ":syn sync fromstart" is not skipped after ":if 0". This can make
7764 Problem: ":%s/~//" causes a crash after ":%s/x//". (Gary Holloway)
7787 Problem: Indenting a Java file hangs below a line with a comment after a
7924 fileinfo(), the redraw is done after a delay to give the user time
7999 Solution: Free a line after calling ml_append().
8039 Solution: Check for an interrupt after each pasted line.
8048 Also avoid restarting Vim after registering.
8120 parenthesis only after the function name. (Servatius Brandt)
8128 ":unlet garbage foo" tries unletting "foo" after an error message.
8133 Break out of a loop after an invalid argument for ":unlet".
8138 Problem: Defining a function after ":if 0" could still cause an error
8211 character is not correctly inserted after expanding the
8219 Solution: Restore msg_col after using input().
8246 Problem: Resetting the iconv() state after each error is wrong for an
8254 Solution: Only give the message after the terminal has been initialized.
8292 errors, skip over it after an error in the first line.
8296 Problem: In Insert mode CTRL-X CTRL-G leaves the cursor after the ruler.
8510 Problem: When exiting with "wq" and there is a hidden buffer, after the
8633 Solution: Remove a semicolon after an "if". (Walter Briscoe)
8643 A(B())" does not stop after B() is finished.
8878 a couple more places. Fix crash after patch 6.1.362. Correct
8953 after a BufWriteCmd autocommand was used.
9014 after the connection is closed.
9168 the shell prompt may be after a hit-enter prompt.
9354 Problem: "zj" and "zk" cannot be used as a motion command after an
9419 Patch 6.1.452 (extra, after 6.1.446)
9424 Patch 6.1.453 (after 6.1.429)
9451 Patch 6.1.456 (extra, after 6.1.454)
9474 Problem: GTK: after scrolling the text one line with a key, clicking the
9505 Patch 6.1.465 (after 6.1.454)
9508 Undefine WIN32 after including windows.h
9541 Problem: ":jumps" output continues after pressing "q" at the more-prompt.
9589 Problem: Two error messages without a colon after the number.
9626 Note: touch src/auto/configure after applying this patch.
9690 Solution: Check for a non-empty string before and after the comma.
9716 Solution: Don't read composing characters from after the end of the
9730 Can't activate XIM after typing fFtT command or ":sh".
9742 Patch 6.2f.030 (after 6.2f.028)
9761 duplicate databases after an empty entry.
9781 Solution: Ignore an illegal byte after the cursor position.
9985 Solution: Show the dialog after creating it. (David Necas)
10033 Patch 6.2.014 (after 6.2.012)
10196 Patch 6.2.041 (extra, after 6.2.033)
10294 Solution: Define HAVE_PUTENV. Undefine OK after including curses.h.
10368 adjust the cursor column after drawing the string.
10377 Patch 6.2.069 (after 6.2.064)
10383 Patch 6.2.070 (after 6.2.069)
10468 Problem: "g_" in Visual mode always goes to the character after the line.
10550 Patch 6.2.098 (after 6.2.097)
10652 Problem: Using ":startinsert" after "$" works like "a" instead of "i".
10695 Patch 6.2.119 (after 6.2.107)
10707 Patch 6.2.121 (after 6.2.118)
10712 Patch 6.2.122 (after 6.2.119)
10720 Patch 6.2.123 (after 6.2.118)
10725 Patch 6.2.124 (after 6.2.121)(extra)
10736 Patch 6.2.125 (after 6.2.107)
10753 Patch 6.2.128 (after 6.2.118)
10827 Patch 6.2.140 (after 6.2.121)
10831 Move "-ldl" after "DynaLoader.a" in the link command.
10840 Patch 6.2.142 (after 6.2.124)
10861 Solution: Add the header after adding HREF for links.
10866 Patch 6.2.145 (after 6.2.139)
10936 Patch 6.2.156 (after 6.2.125)
10976 position, e.g. after ":call cursor(1, 0)". (Eugene Minkovskii)
10985 Patch 6.2.164 (after 6.2.144)
11030 Patch 6.2.171 (after 6.2.163)
11035 Patch 6.2.172 (after 6.2.169)
11055 Solution: Move the use of p_bex to after executing the *WritePre
11056 autocommands. Also avoids reading allocated memory after freeing.
11089 Patch 6.2.181 (after 6.2.171)
11095 Patch 6.2.182 (after 6.2.094)
11101 Patch 6.2.183 (after 6.2.178)
11110 after moving the word after the cursor to the next line.
11125 Patch 6.2.186 (after 6.2.185)
11144 Problem: When setting 'viminfo' after editing a new buffer its marks are
11188 Patch 6.2.194 (after 6.2.068)
11199 Patch 6.2.195 (after 6.2.190)
11204 Patch 6.2.196 (after 6.2.191)
11221 Patch 6.2.199 (after 6.2.194)
11256 Patch 6.2.204 (after 6.2.086)
11259 Solution: Find one position in each closed fold, then move to after the fold.
11320 Patch 6.2.212 (after 6.2.199)
11326 Patch 6.2.213 (after 6.2.208)
11332 Patch 6.2.214 (after 6.2.211) (extra)
11344 Patch 6.2.216 (after 6.2.206)
11407 Patch 6.2.226 (after 6.2.107) (extra)
11419 Problem: Receiving CTRL-\ CTRL-N after typing "f" or "m" doesn't switch Vim
11421 Solution: Check if the character typed after a command is CTRL-\ and obtain
11440 Patch 6.2.231 (after 6.2.046)
11445 Solution: Update "force_abort" also after calling a builtin function, so
11499 Patch 6.2.238 (after 6.2.231)
11547 and leaves "cho" after it.
11564 Patch 6.2.247 (after 6.2.193)
11591 focus back after handling a dialog.
11597 Patch 6.2.252 (extra, after 6.2.243)
11604 Problem: When 'tagstack' is not set a ":tag id" command does not work after
11615 Problem: GTK: A new item in the popup menu is put just after instead of
11626 Patch 6.2.257 (after 6.2.250)
11677 Patch 6.2.264 (after 6.2.247)
11727 Solution: Wait after initializing the log. Allow passing the socket info
11734 deleted after running configure.
11753 Patch 6.2.275 (extra, after 6.2.267)
11761 Solution: Invoke msg_start() after evaluating the argument.
11829 Patch 6.2.287 (after 6.2.264)
11849 Solution: Add mousewheel support. Also fix updating the thumb after a drag
11865 Patch 6.2.293 (after 6.2.255)
11894 Patch 6.2.297 (after 6.2.232)
11921 Patch 6.2.300 (after 6.2.297)
11936 Solution: Restore "restart_edit" after an insert command that was not typed.
11939 Fix that "CTRL-O ." sometimes doesn't put the cursor back after
11951 Patch 6.2.304 (extra, after 6.2.256)
11959 Patch 6.2.305 (after 6.2.300)
11971 Patch 6.2.307 (after 6.2.299)
11993 Patch 6.2.311 (after 6.2.298)
12004 Patch 6.2.312 (after 6.2.299)
12030 Patch 6.2.316 (after 6.2.312)
12036 Patch 6.2.317 (after 6.2.313)
12068 Problem: With 'showcmd' set, after typing "dd" the next "d" may not be
12070 Solution: Redraw the command line after updating the screen, scrolling may
12121 Patch 6.2.330 (extra, after 6.2.267)
12126 Patch 6.2.331 (after 6.2.327)
12135 Solution: Use a char pointer instead. Move including "gui_amiga.h" to after
12144 Patch 6.2.334 (extra, after 6.2.296)
12155 Patch 6.2.336 (after 6.2.327)
12160 Patch 6.2.337 (extra, after 6.2.319)
12165 Patch 6.2.338 (after 6.2.331)
12208 Patch 6.2.344 (extra, after 6.2.337)
12257 Patch 6.2.352 (after 6.2.335)
12260 arguments after "buff=1".
12274 Patch 6.2.355 (after 6.2.303)
12293 Patch 6.2.357 (after 6.2.321)
12298 Patch 6.2.358 (after 6.2.299)
12303 Patch 6.2.359 (after 6.2.352)
12321 Patch 6.2.362 (extra, after 6.2.347)
12424 Patch 6.2.377 (after 6.2.372)
12429 Patch 6.2.378 (extra, after 6.2.118)
12453 There is no "+" in the title after setting 'fileencoding'.
12455 file modified by changing 'fileencoding'. Update the title after
12510 Solution: Correct the cursor position after replacing each character.
12521 Patch 6.2.392 (after 6.2.384)
12532 Patch 6.2.394 (after 6.2.391)
12549 Solution: Set the line number after loading the file.
12614 Patch 6.2.407 (after 6.2.299)
12632 Problem: The cursor ends up in the last column instead of after the line
12638 Patch 6.2.410 (after 6.2.389)
12659 Patch 6.2.413 (after 6.2.411)
12672 Problem: Vim may crash after a sequence of events that change the window
12684 Patch 6.2.417 (after 6.2.393)
12774 Solution: Detect the BOM and skip over it. Also fix that after using
12788 Patch 6.2.432 (after 6.2.430 and 6.2.431)
12799 Patch 6.2.434 (after 6.2.431)
12880 Patch 6.2.446 (after 6.2.404)
12886 Patch 6.2.447 (after 6.2.440)
12892 Patch 6.2.448 (after 6.2.427)
12899 Patch 6.2.449 (after 6.2.431)
12939 Patch 6.2.455 (after 6.2.297)
12954 Patch 6.2.457 (after 6.2.244)
12968 Patch 6.2.459 (after 6.2.454)
12973 Patch 6.2.460 (extra, after 6.2.456)
12999 Patch 6.2.464 (extra, after 6.2.427)
13007 Solution: Check the window position after resizing it and move it onto the
13011 Patch 6.2.466 (extra, after 6.2.456)
13017 Patch 6.2.467 (extra, after 6.2.463)
13029 Patch 6.2.469 (extra, after 6.2.456)
13045 Solution: Check for a space after the argument instead of before. Also
13068 Patch 6.2.474 (extra, after 6.2.456)
13077 Problem: Commands after "perl <<EOF" are parsed as Vim commands when they
13137 Patch 6.2.483 (extra, after 6.2.482)
13143 Problem: MS-Windows: With the included diff.exe, differences after a CTRL-Z
13161 Patch 6.2.487 (extra, after 6.2.456)
13194 Solution: Reset msg_didout and msg_col, so that after ":redraw" the next
13201 after executing the register contents.
13210 Patch 6.2.495 (extra, after 6.2.456)
13239 Solution: Use fsync() to flush the file data to disk after writing a file.
13307 Patch 6.2.509 (after 6.2.508)
13312 Patch 6.2.510 (after 6.2.507)
13331 Patch 6.2.513 (after 6.2.507)
13366 Problem: Last line of a window is not updated after using "J" and then "D".
13404 Patch 6.2.524 (extra, after 6.2.520)
13438 Solution: Call netbeans_inserted() after performing "~". (Gordon Prieur)
13573 Solution: Flush output after showing the dialog.
13584 Patch 6.3a.018 (after 6.3a.017)
13604 Patch 6.3a.021 (after 6.3a.017)
13632 "forceit" after doing the work for one file.
13643 Patch 6.3a.026 (extra, after 6.3a.008)
13651 Patch 6.3a.027 (extra, after 6.3a.026)
13699 Solution: Restore window sizes both before and after restoring the view, so
13729 Patch 6.3b.012 (after 6.3b.010)
13791 after creating the swapfile.
13801 Problem: When "3dip" starts in an empty line, white lines after the
13905 line for the cmdline. (Christian Robinson) Invoke command_height() after the
13970 Patch 6.3.009 (after 6.3.006)
14005 Solution: Use the part of the locale name after "zh_".
14015 Solution: Add a star after "\s". (Herculano de Lima Einloft Neto)
14021 Solution: Correct the cursor column after moving to another line.
14025 Problem: ":0argadd zero" added the argument after the first one, instead of
14032 Solution: Move the call to nbdebug_wait() to after allocating NameBuff.
14082 Problem: When ~/.vim/after/syntax/syncolor.vim contains a command that
14105 Solution: In the syntax highlighting code, don't use an old state after a
14121 Solution: Reposition the cursor after drawing over the "..." of the
14127 Solution: Release the lock after initialization.
14133 Solution: Check that the mapping has ended after obtaining all characters of
14156 Patch 6.3.037 (after 6.3.032)
14162 Problem: Win32: When the "file changed" dialog pops up after a click that
14163 gives gvim focus and not moving the mouse after that, the effect
14241 Patch 6.3.049 (after 6.3.045)
14278 Patch 6.3.055 (after 6.3.013)
14335 Solution: Call gui_mouse_correct() after triggering CursorHold.
14355 Patch 6.3.067 (after 6.3.066)
14379 Problem: The message for CTRL-X mode is still displayed after an error for
14420 Problem: VMS: First character input after ESC was not recognized.
14424 Patch 6.3.078 (extra, after 6.3.077)
14425 Problem: VMS: Performance issue after patch 6.3.077
14448 Patch 6.3.082 (after 6.3.081)
14511 Problem: In Insert mode, pasting a multibyte character after the end of
14517 Patch 6.4b.003 (after 6.4b.002)