Lines Matching refs:option
29 vim [option | filename] ..
44 an option, precede the arglist with "--", e.g.: >
87 If [errorfile] is not given, the 'errorfile' option is used
124 The option arguments may be given in any order. Single-letter options can be
125 combined after one dash. There can be no option arguments after the "--"
128 On VMS all option arguments are assumed to be lowercase, unless preceded with
142 --noplugin Skip loading plugins. Resets the 'loadplugins' option.
212 argument or when another "-" option follows.
224 -R Readonly mode. The 'readonly' option will be set for all the
229 the Ex command, as in ":w!". The 'readonly' option can be
233 The 'updatecount' option will be set to 10000, meaning that
238 -m Modifications not allowed to be written. The 'write' option
240 the 'write' option can be set to enable writing again.
243 -M Modifications not allowed. The 'modifiable' option will be
244 reset, so that changes are not allowed. The 'write' option
289 :set to display option values.
306 lines. The 'expandtab' option will be reset. The 'textwidth'
307 option is set to 0. 'modeline' is reset. The 'binary' option
316 -A Arabic mode. Sets the 'arabic' option on. {only when
331 -V[N] Verbose. Sets the 'verbose' option to [N] (default: 10).
351 -C Compatible mode. Sets the 'compatible' option. You can use
363 -N Not compatible mode. Resets the 'compatible' option. You can
380 on again by setting the 'updatecount' option to some value,
403 If both the -o and the -O option are given, the last one on
454 option should be used when Vim is started by a program that
458 MS-Windows: This option is not supported. However, when
489 has the side effect that the 'compatible' option will be on by
521 which is then stored in the 'key' option. All writes will
536 'clipboard' option.
538 been built in, the -X option also disables that connection as
554 -w{number} Set the 'window' option to {number}.
691 correctly. But when Vim was started with the -f option (foreground
693 when a program starts Vim with the -f option it will wait for Vim to
695 Vim exits. The -f option can be used when Vim is started by a mail
698 -f option is used.
765 1. Set the 'shell' and 'term' option *SHELL* *COMSPEC* *TERM*
767 'shell' option. On Win32, the COMSPEC variable is used
770 option. However, 'term' will change later when starting the GUI (step
811 initializations until 4. are skipped. Only the "-u" option is
859 d. If the 'exrc' option is on (which is NOT the default), the current
878 < The result is that all directories in the 'runtimepath' option will be
885 - The 'loadplugins' option was reset in a vimrc file.
906 value of the 'shell' option, unless they have been set before.
921 If the 'viminfo' option is not empty, the viminfo file is read. See
941 If the 'insertmode' option is set, Insert mode is entered.
960 Note that creating a vimrc file will cause the 'compatible' option to be off
967 on the option 'exrc'. See |trojan-horse| too.
1006 When Vim starts, the 'compatible' option is on. This will be used when Vim
1015 then the option will be set to 'nocompatible'.
1067 commands can be disabled for security reasons by setting the 'secure' option.
1074 can reset the 'secure' option in the EXINIT or VIMINIT environment variable or
1081 option. Some Unix systems allow a user to do "chown" on a file. This makes
1180 5. When the 'helpfile' option is set and doesn't contain a '$', its value is
1276 When special keys are used in mappings, The 'cpoptions' option will be
1291 *vimrc-option-example*
1292 If you only want to add a single option setting to your vimrc, you can use
1295 2. Play with the option until it's right. E.g., try out different values for
1297 3. Append a line to set the value of the option, using the expression register
1298 '=' to enter the value. E.g., for the 'guifont' option: >
1304 option, which has several side effects. See |'compatible'|.
1306 'compatible' option to the output file first, because of these side effects.
1341 added to the file. Which ones depends on the 'sessionoptions' option. The
1429 - Global option values are only set when they differ from the default value.
1448 with the 'viewdir' option. The views are stored using the file name. If a
1489 When Vim is started and the 'viminfo' option is non-empty, the contents of
1493 option upon startup.
1498 'viminfo' option is a string containing information about what info should be
1589 - The 'n' flag in the 'viminfo' option can be used to specify another viminfo
1594 - The 'viminfofile' option can be used like the "-i" argument. In fact, the
1595 value from the "-i" argument is stored in the 'viminfofile' option.
1603 option. Normally you will always work with the same 'encoding' value, and
1607 flag to the 'viminfo' option: >