Lines Matching refs:of

19 # the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into
20 # libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
46 # Enabling this option can be useful when feeding doxygen a huge amount of
72 # the brief description of a member or function before the detailed description.
80 # in this list, if found as the leading text of the brief description, will be
84 # replaced with the name of the entity): "The $name class" "The $name widget"
97 # inherited members of a class in the documentation of that class as if those
99 # operators of the base classes will not be shown.
110 # can be used to strip a user-defined part of the path. Stripping is
111 # only done if one of the specified strings matches the left-hand part of
118 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
119 # the path mentioned in the documentation of a class, which tells
121 # If left blank only the name of the header file containing the class
134 # will interpret the first line (until the first dot) of a JavaDoc-style
142 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
163 # a new page for each member. If set to NO, the documentation of a member will
164 # be part of the file/class/namespace that contains it.
168 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
173 # This tag can be used to specify a number of aliases that acts
178 # You can put \n's in the value part of an alias to insert newlines.
182 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
184 # For instance, some of the names that are used will be different. The list
185 # of all members will be omitted, etc.
189 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
211 # tag is set to YES, then doxygen will reuse the documentation of the first
212 # member in the group (if any) for the other members of the group. By default
213 # all members of a group must be documented explicitly.
217 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
218 # the same type (for instance a group of public functions) to be put as a
219 # subgroup of that type (e.g. under the Public Functions section). Set it to
236 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
241 # If the EXTRACT_STATIC tag is set to YES all static members of a file
260 # undocumented members of documented classes, files or namespaces.
282 # documentation blocks found inside the body of a function.
310 # will put a list of the files that are included by a file in the documentation
311 # of that file.
321 # will sort the (detailed) documentation of file and class members
328 # brief documentation of file, namespace and class members alphabetically
373 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
374 # the initial value of a variable or define consists of for it to appear in
375 # the documentation. If the initializer consists of more lines than specified
376 # here it will be hidden. Use a value of 0 to hide initializers completely.
377 # The appearance of the initializer of individual variables and defines in the
379 # command in the documentation regardless of this setting.
383 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
384 # at the bottom of the documentation of classes and structs. If set to YES the
398 # popen()) the command <command> <input-file>, where <command> is the value of
399 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
436 # wrong or incomplete parameter documentation, but not about the absence of
441 # The WARN_FORMAT tag determines the format of the warning messages that
445 # $version, which will be replaced by the version of the file (if it could
467 # This tag can be used to specify the character encoding of the source files that
470 # See http://www.gnu.org/software/libiconv for the list of possible encodings.
474 # If the value of the INPUT tag contains directories, you can use the
502 # If the value of the INPUT tag contains directories, you can use the
523 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
532 # commands irrespective of the value of the RECURSIVE tag.
546 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
555 # filter if there is a match.  The filters are a list of the form:
572 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
574 # Note: To get rid of all source code in the generated output, make sure also
580 # of functions and classes directly in the documentation.
610 # will point to the HTML generated by the htags(1) tool instead of doxygen
611 # built-in source browser. The htags tool is part of GNU's global source
618 # will generate a verbatim copy of the header file for each class for
628 # of all compounds will be generated. Enable this if the project
629 # contains a lot of classes, structs, unions or interfaces.
634 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
656 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
657 # put in front of it. If left blank `html' will be used as the default path.
681 # fine-tune the look of the HTML output. If the tag is left blank doxygen
688 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
697 # of the generated HTML documentation.
702 # be used to specify the file name of the resulting .chm file. You
703 # can add a path in front of the file if the result should not be
709 # be used to specify the location (absolute path including file name) of
722 # controls whether a binary table of contents is generated (YES) or a
723 # normal table of contents (NO) in the .chm file.
728 # to the contents of the HTML help documentation and to the tree view.
733 # top of each HTML page. The value NO (the default) enables the index and
738 # This tag can be used to set the number of enum values (range [1..20])
753 # used to set the initial width (in pixels) of the frame in which the tree
768 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
769 # put in front of it. If left blank `latex' will be used as the default path.
796 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
810 # contain links (just like the HTML output) instead of page references
815 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
823 # running if errors occur, instead of asking the user for help.
845 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
846 # put in front of it. If left blank `rtf' will be used as the default path.
858 # contain links (just like the HTML output) instead of page references.
866 # config file, i.e. a series of assignments. You only have to provide
871 # Set optional variables used in the generation of an rtf document.
886 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
887 # put in front of it. If left blank `man' will be used as the default path.
909 # generate an XML file that captures the structure of
915 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
916 # put in front of it. If left blank `xml' will be used as the default path.
922 # syntax of the XML files.
928 # syntax of the XML files.
935 # enabling this will significantly increase the size of the XML output.
945 # that captures the structure of the code including all
956 # generate a Perl module file that captures the structure of
972 # tag is set to NO the size of the Perl module output will be much smaller
977 # The names of the make variables in the generated doxyrules.make file
1026 # are defined before the preprocessor is started (similar to the -D option of
1027 # gcc). The argument of the tag is a list of macros of the form: name
1031 # instead of the = operator.
1036 # this tag can be used to specify a list of macro names that should be expanded.
1055 # Optionally an initial location of the external documentation
1056 # can be added for each tagfile. The format of a tag file without
1088 # The PERL_PATH should be the absolute path and name of the perl script
1089 # interpreter (i.e. the result of `which perl').
1121 # available from the path. This tool is part of Graphviz, a graph visualization
1137 # class references variables) of the class with other documented classes.
1159 # file showing the direct and indirect include dependencies of the file with
1173 # Note that enabling this option will significantly increase the time of a run.
1181 # Note that enabling this option will significantly increase the time of a run.
1188 # will graphical hierarchy of all classes instead of a textual one.
1199 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1216 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1217 # nodes that will be shown in the graph. If the number of nodes in a graph
1220 # show the root nodes and its direct children regardless of this setting.
1227 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1234 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1240 # generate a legend page explaining the meaning of the various boxes and
1256 # used. If set to NO the values of all tags below this one will be ignored.