Lines Matching refs:console
14 the console before standard serial driver is probed. The console is
33 bool "Support for console on AMBA serial port"
38 console (the system console is the device which receives all kernel
41 Even if you say Y here, the currently visible framebuffer console
42 (/dev/tty0) will still be used as the system console by default, but
44 "console=ttyAM0". (Try "man bootparam" or see the documentation of
60 bool "Support for console on AMBA serial port"
66 console (the system console is the device which receives all kernel
69 Even if you say Y here, the currently visible framebuffer console
70 (/dev/tty0) will still be used as the system console by default, but
72 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
77 bool "Early console using Arm compatible semihosting"
83 Support for early debug console using Arm compatible semihosting.
84 This enables the console before standard serial driver is probed.
86 The console is enabled when early_param is processed.
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
96 the console before standard serial driver is probed. This is enabled
97 with "earlycon=sbi" on the kernel command line. The console is
116 bool "Support for console on a BCM1xxx DUART serial port"
122 system console (the system console is the device which receives all
140 bool "Support for console on AT91 serial port"
146 AT91 processor as the system console (the system
147 console is the device which receives all kernel messages and
178 /dev/, and pass "console=ttyATn" to the kernel.
191 bool "Support for console on meson"
197 system console (the system console is the device which
211 bool "Support for console on CLPS711X serial port"
215 Even if you say Y here, the currently visible virtual console
216 (/dev/tty0) will still be used as the system console by default, but
218 "console=ttyCL1".
241 bool "Support for console on Samsung SoC serial port"
247 an virtual console.
249 Even if you say Y here, the currently visible virtual console
250 (/dev/tty0) will still be used as the system console by default, but
252 "console=ttySACx". (Try "man bootparam" or see the documentation of
278 bool "Support for console on a Tegra TCU serial port"
284 system console (the system console is the device which receives all
301 bool "Support for console on a Tegra UTC serial port"
307 the system console (the system console is the device which receives
347 bool "Support console on DECstation DZ serial driver"
353 system console (the system console is the device which receives all
357 Note that the firmware uses ttyS3 as the serial console on
377 bool "Support for console on a DECstation Z85C30 serial port"
383 system console (the system console is the device which receives all
387 Note that the firmware uses ttyS1 as the serial console on the
407 make it the console by answering Y to this option.
409 Even if you say Y here, the currently visible virtual console
410 (/dev/tty0) will still be used as the system console by default, but
412 "console=ttyFB". (Try "man bootparam" or see the documentation of
440 CPU you can make it the console by answering Y to this option.
442 Even if you say Y here, the currently visible virtual console
443 (/dev/tty0) will still be used as the system console by default, but
445 "console=ttySA0". (Try "man bootparam" or see the documentation of
469 CPU you can make it the console by answering Y to this option.
471 Even if you say Y here, the currently visible virtual console
472 (/dev/tty0) will still be used as the system console by default, but
474 "console=ttySA0". (Try "man bootparam" or see the documentation of
494 CPU you can make it the console by answering Y/M to this option.
496 Even if you say Y/M here, the currently visible virtual console
497 (/dev/tty0) will still be used as the system console by default, but
499 "console=ttymxc0". (Try "man bootparam" or see the documentation of
525 bool "Support for console on Xilinx uartlite serial port"
531 console (the system console is the device which receives all kernel
565 on your Sparc system as the console, you can do so by answering
581 on your Sparc system as the console, you can do so by answering
594 software console. The following steps need to be completed to use
600 root on this console.)
601 4. Change the kernel command console parameter to: console=ttyB0
604 bool "Support for console on serial MUX"
622 on your Sparc system as the console, you can do so by answering
629 This driver supports the console device found on SUN4V Sparc
661 bool "Support for console on SuperH SCI(F)" if EXPERT
667 bool "Support for early console on SuperH SCI(F)" if EXPERT
690 bool "Enable LPC32XX high speed UART serial console"
695 ports on the LPC32XX as the console, you can do so by answering
724 bool "Coldfire serial console support"
728 Enable a ColdFire internal serial port to be the system console.
770 on your (Power)Mac as the console, you can do so by answering
782 bool "Support for console on CPM SCC/SMC serial port"
787 console (the system console is the device which receives all kernel
790 Even if you say Y here, the currently visible framebuffer console
791 (/dev/tty0) will still be used as the system console by default, but
793 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
805 to use a serial port as a console, this must be included in kernel and
809 bool "PIC32 serial console support"
813 If you have a PIC32, this driver supports the putting a console on one
816 Say Y to use the PIC32 console, otherwise say N.
825 for use as console, it must be included in kernel and not as a
834 of the Freescale MPC52xx family as a console.
841 Select the MPC52xx console baud rate.
843 console baudrate
904 bool "MSM serial console support"
921 Serial console driver for Qualcomm Technologies Inc's GENI based
930 bool "VIA VT8500 serial console support"
952 console.
954 Even if you say Y here, the currently visible virtual console
955 (/dev/tty0) will still be used as the system console by default, but
957 "console=ttyOx". (Try "man bootparam" or see the documentation of
979 system console.
981 Even if you say Y here, the currently visible virtual console
982 (/dev/tty0) will still be used as the system console by default, but
984 "console=ttySIFx". (Try "man bootparam" or see the documentation of
1004 system console.
1028 Support for console on SCCNXP serial ports.
1076 BCM7xxx (STB) - DOCSIS console
1085 you can make it the console by answering Y to this option.
1099 Support for running a console on the GRLIB APBUART
1108 bool "Altera JTAG UART console support"
1113 Enable a Altera JTAG UART port to be the system console.
1120 Bypass console output and keep going even if there is no
1148 bool "Altera UART console support"
1153 Enable a Altera UART port to be the system console.
1172 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1176 Say Y here if you wish to use the PCH UART as the system console
1177 (the system console is the device which receives all kernel messages and
1190 bool "MXS AUART console support"
1194 Enable a MXS AUART port to be the system console.
1205 bool "Cadence UART console support"
1210 Enable a Cadence UART port to be the system console.
1229 Enable a built-in UART port of the AR933X to be the system console.
1240 bool "MPS2 UART console support"
1314 you can make it the console by answering Y to this option.
1330 SoCs, you can make it the console by answering Y to this option.
1345 SoCs, you can make it the console by answering Y to this option.
1360 bool "Support for console on ST ASC"
1383 bool "Spreadtrum UART console support"
1388 Support for early debug console using Spreadtrum's serial. This enables
1389 the console before standard serial driver is probed. This is enabled
1390 with "earlycon" on the kernel command line. The console is
1407 bool "Support for console on STM32"
1431 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1432 (the system console is the device which receives all kernel messages
1453 as the system console.
1472 console. Only earlycon is implemented currently.
1489 bool "Support for console on MILBEAUT USIO/UART serial port"
1496 SoCs as the system console (the system console is the device which
1522 bool "LiteUART serial port console support"
1528 controller from LiteX SoC builder as the system console
1529 (the system console is the device which receives all kernel messages
1552 system console.
1553 Even if you say Y here, the currently visible virtual console
1554 (/dev/tty0) will still be used as the system console by default, but
1556 "console=ttySUPx".
1565 for use as console, it must be included in kernel and not as a
1575 Nuvoton MA35D1 family as a console.
1576 Even if you say Y here, the currently visible virtual console
1577 (/dev/tty0) will still be used as the system console by default,
1579 "console=ttyNVTx".