Lines Matching refs:SCSI
2 menu "SCSI device support"
6 default y if SCSI=n || SCSI=y
7 default m if SCSI=m
21 config SCSI config
22 tristate "SCSI device support"
29 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
30 any other SCSI device under Linux, say Y and make sure that you know
31 the name of your SCSI host adapter (the card inside your computer
32 that "speaks" the SCSI protocol, also called SCSI controller),
36 the SCSI protocol. Examples of this include the parallel port
45 (the one containing the directory /) is located on a SCSI device.
61 depends on SCSI && PROC_FS
71 tristate "KUnit tests for SCSI Mid Layer's scsi_lib" if !KUNIT_ALL_TESTS
75 Run SCSI Mid Layer's KUnit tests for scsi_lib.
79 comment "SCSI support type (disk, tape, CD-ROM)"
80 depends on SCSI
83 tristate "SCSI disk support"
84 depends on SCSI
86 If you want to use SCSI hard disks, Fibre Channel disks,
88 USB storage or the SCSI or parallel port version of
89 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
91 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
99 (the one containing the directory /) is located on a SCSI disk.
100 In this case, do not compile the driver for your SCSI host adapter
104 tristate "SCSI tape support"
105 depends on SCSI
107 If you want to use a SCSI tape drive under Linux, say Y and read the
108 SCSI-HOWTO, available from
111 for SCSI CD-ROMs.
117 tristate "SCSI CDROM support"
118 depends on SCSI && BLK_DEV
122 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
132 tristate "SCSI generic support"
133 depends on SCSI
135 If you want to use SCSI scanners, synthesizers or CD-writers or just
136 about anything having "SCSI" in its name other than hard disks,
139 talk to these devices using the SCSI protocol:
158 depends on SCSI
161 Saying Y here will enable generic SG (SCSI generic) v4 support
162 for any SCSI device.
169 tristate "SCSI media changer support"
170 depends on SCSI
172 This is a driver for SCSI media changers. Most common devices are
186 tristate "SCSI Enclosure Support"
187 depends on SCSI && ENCLOSURE_SERVICES
190 Enclosures are devices sitting on or in SCSI backplanes that
196 bool "Verbose SCSI error reporting (kernel size += 36K)"
197 depends on SCSI
199 The error messages regarding your SCSI hardware will be easier to
204 bool "SCSI logging facility"
205 depends on SCSI
208 of SCSI related problems.
224 If you say N here, it may be harder to track down some types of SCSI
230 bool "Asynchronous SCSI scanning"
231 depends on SCSI
233 The SCSI subsystem can probe for devices while the rest of the
245 depends on SCSI && KUNIT
248 menu "SCSI Transports"
249 depends on SCSI
252 tristate "Parallel SCSI (SPI) Transport Attributes"
253 depends on SCSI
256 each attached SCSI device to sysfs, say Y. Otherwise, say N.
260 depends on SCSI && NET
270 depends on SCSI && NET
279 depends on SCSI
289 depends on SCSI
297 bool "SCSI low-level drivers"
298 depends on SCSI!=n
301 if SCSI_LOWLEVEL && SCSI
305 depends on SCSI && INET
313 SCSI requests and responses over a TCP/IP network between the host
316 Interface Card (NIC) to provide the same functions as a SCSI or a
341 tristate "SGI WD93C93 SCSI Driver"
342 depends on SGI_HAS_WD93 && SCSI
344 If you have a Western Digital WD93 SCSI controller on
349 depends on PCI && HAS_IOPORT && SCSI
353 SCSI support required!!!
361 tristate "HP Smart Array SCSI driver"
362 depends on PCI && SCSI
367 It is a SCSI alternative to the cciss driver, which is a block
369 would prefer the devices be presented to linux as SCSI devices,
374 depends on PCI && SCSI
385 depends on PCI && SCSI
395 tristate "ACARD SCSI support"
396 depends on PCI && HAS_IOPORT && SCSI
398 This driver supports the ACARD SCSI host adapter.
405 depends on ISA && SCSI
410 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
413 It is explained in section 3.3 of the SCSI-HOWTO, available from
422 depends on ISA && SCSI && ISA_DMA_API
424 This is support for a SCSI host adapter. It is explained in section
425 3.4 of the SCSI-HOWTO, available from
436 depends on EISA && SCSI
438 This is support for a SCSI host adapter. It is explained in section
439 3.5 of the SCSI-HOWTO, available from
449 depends on SCSI && PCI
467 depends on SCSI && PCI
475 tristate "AdvanSys SCSI support"
476 depends on SCSI
480 This is a driver for all SCSI host adapters manufactured by
489 depends on PCI && SCSI
508 depends on SCSI && PCI
517 tristate "BusLogic SCSI support"
518 depends on SCSI && PCI && HAS_IOPORT
520 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
521 Adapters. Consult the SCSI-HOWTO, available from
536 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
556 tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
563 newer, SCSI-based interface only.
573 depends on PCI && SCSI && X86
575 This driver supports VMware's para virtualized SCSI HBA.
580 tristate "XEN SCSI frontend driver"
581 depends on SCSI && XEN
584 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
587 SCSI access to a device is needed.
591 depends on SCSI && HYPERV
630 depends on PCI && SCSI
632 This is support for the Cisco PCI-Express SCSI HBA.
646 tristate "DMX3191D SCSI support"
647 depends on PCI && HAS_IOPORT && SCSI
650 This is support for Domex DMX3191D SCSI Host Adapters.
657 depends on SCSI
660 tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
661 depends on PCI && HAS_IOPORT && SCSI
664 This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
669 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
677 tristate "Future Domain 16xx ISA SCSI support"
678 depends on ISA && SCSI
682 This is support for Future Domain's 16-bit SCSI host adapters
692 depends on PCI && SCSI
700 tristate "Generic NCR5380/53c400 SCSI ISA card support"
701 depends on ISA && SCSI && HAS_IOPORT_MAP
704 This is a driver for old ISA card SCSI controllers based on a
707 various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
714 depends on PCI && HAS_IOPORT && SCSI
727 tristate "IBM Virtual SCSI support"
731 This is the IBM POWER Virtual SCSI Client
737 tristate "IBM Virtual SCSI Server support"
738 depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
740 This is the IBM POWER Virtual SCSI Target Server
755 depends on PPC_PSERIES && SCSI
774 depends on PCI && HAS_IOPORT && SCSI
776 This is support for the Initio 91XXU(W) SCSI host adapter. Please
777 read the SCSI-HOWTO, available from
785 depends on PCI && HAS_IOPORT && SCSI
787 This is support for the Initio INI-A100U2W SCSI host adapter.
788 Please read the SCSI-HOWTO, available from
796 depends on SCSI && PARPORT_PC
802 Note that you can say N here if you have the SCSI version of the ZIP
804 generic "SCSI disk support", above.
813 the SCSI-HOWTO, which is available from
824 depends on SCSI && PARPORT_PC
829 Note that you can say N here if you have the SCSI version of the ZIP
831 generic "SCSI disk support", above.
840 the SCSI-HOWTO, which is available from
864 tristate "HP Lasi SCSI support for 53c700/710"
865 depends on GSC && SCSI
868 This is a driver for the SCSI controller in the Lasi chip found in
873 tristate "SNI RM SCSI support for 53c710"
874 depends on SNI_RM && SCSI
878 This is a driver for the onboard SCSI controller found in older
888 depends on PCI && SCSI
904 tristate "SYM53C8XX Version 2 SCSI support"
905 depends on PCI && SCSI
909 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
911 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
922 This option only applies to PCI-SCSI chips that are PCI DAC
946 driver will announce to the generic SCSI layer for devices
972 depends on PCI && SCSI
1000 tristate "Zalon SCSI support"
1001 depends on GSC && SCSI
1005 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1007 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1015 "Tagged command queuing" is a feature of SCSI-2 which improves
1016 performance: the host adapter can send several SCSI commands to a
1019 (like head positioning) based on its own request queue. Some SCSI
1034 There is no safe option other than using good SCSI devices.
1058 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1067 a value between 5 and 80, depending on the capability of your SCSI
1082 your SCSI devices, you should come back and decrease the value.
1085 terminations and SCSI conformant devices.
1091 This option is only provided for safety if you suspect some SCSI
1095 than 1 device on a SCSI bus. The normal answer therefore is N.
1098 tristate "Qlogic FAS SCSI support"
1099 depends on ISA && SCSI
1103 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1107 SCSI support"), below.
1111 SCSI-HOWTO, available from
1118 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1119 depends on PCI && SCSI
1121 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1128 depends on SBUS && SCSI
1130 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1132 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1145 depends on PCI && SCSI
1166 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1167 depends on EISA && SCSI
1170 This driver is for NCR53c710 based SCSI host adapters.
1175 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
1176 depends on PCI && HAS_IOPORT && SCSI
1179 This driver supports PCI SCSI host adapters based on the ASIC
1191 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1192 depends on PCI && SCSI
1195 This driver supports PCI SCSI host adapters based on the Am53C974A
1201 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1208 depends on PCI && SCSI && !64BIT && HAS_IOPORT
1211 SCSI host adapter. Please read the SCSI-HOWTO, available from
1219 depends on PCI && SCSI
1223 SCSI controllers (based on WD33C296A chip).
1226 tristate "SCSI debugging host and device simulator"
1227 depends on SCSI
1230 This pseudo driver simulates one or more hosts (SCSI initiators),
1239 tristate "MESH (Power Mac internal SCSI) support"
1240 depends on PPC32 && PPC_PMAC && SCSI
1243 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1244 other Power Macintoshes do). Say Y to include support for this SCSI
1255 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1258 operation at up to 10 MB/s. On machines where the SCSI bus
1261 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1270 tristate "53C94 (Power Mac external SCSI) support"
1271 depends on PPC32 && PPC_PMAC && SCSI
1273 On Power Macintoshes (and clones) with two SCSI buses, the external
1274 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1275 machines which only have one SCSI bus, such as the 7200, also use
1284 bool "MIPS JAZZ FAS216 SCSI support"
1285 depends on MACH_JAZZ && SCSI=y
1288 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1294 depends on AMIGA && SCSI
1296 If you have an Amiga 3000 and have SCSI devices connected to the
1297 built-in SCSI controller, say Y. Otherwise, say N.
1304 depends on ZORRO && SCSI
1306 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1314 depends on ZORRO && SCSI
1316 If you have a Great Valley Products Series II SCSI controller,
1317 answer Y. Also say Y if you have a later model of GVP SCSI
1326 tristate "A4000T NCR53c710 SCSI support"
1327 depends on AMIGA && SCSI
1330 If you have an Amiga 4000T and have SCSI devices connected to the
1331 built-in SCSI controller, say Y. Otherwise, say N.
1337 tristate "Zorro NCR53c710 SCSI support"
1338 depends on ZORRO && SCSI
1341 Support for various NCR53c710-based SCSI controllers on Zorro
1344 - the Amiga 4091 Zorro III SCSI-2 controller,
1345 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1348 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1350 - the SCSI controller on the GVP Turbo 040/060 accelerator.
1353 tristate "Zorro ESP SCSI support"
1354 depends on ZORRO && SCSI
1358 Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
1361 - the Phase5 Blizzard 1230 II and IV SCSI controllers,
1362 - the Phase5 Blizzard 2060 SCSI controller,
1363 - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI
1365 - the Fastlane Zorro III SCSI controller.
1368 tristate "Atari native SCSI support"
1369 depends on ATARI && SCSI
1372 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1374 a compatible SCSI controller (e.g. for Medusa).
1377 be called atari_scsi. If you also enable NVRAM support, the SCSI
1386 tristate "Macintosh NCR5380 SCSI"
1387 depends on MAC && SCSI
1390 This is the NCR 5380 SCSI controller included on most of the 68030
1392 SCSI-HOWTO, available from
1396 tristate "Macintosh NCR53c9[46] SCSI"
1397 depends on MAC && SCSI
1401 This is the NCR 53c9x SCSI controller found on most of the 68040
1408 bool "WD33C93 SCSI driver for MVME147"
1409 depends on MVME147 && SCSI=y
1412 Support for the on-board SCSI controller on the Motorola MVME147
1416 tristate "NCR53C710 SCSI driver for MVME16x"
1417 depends on MVME16x && SCSI
1421 SCSI controller chip. Almost everyone using one of these boards
1425 tristate "NCR53C710 SCSI driver for BVME6000"
1426 depends on BVME6000 && SCSI
1430 SCSI controller chip. Almost everyone using one of these boards
1434 tristate "Sun3 NCR5380 SCSI"
1435 depends on SUN3 && SCSI
1439 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1445 bool "Sun3x ESP SCSI"
1446 depends on SUN3X && SCSI=y
1449 The ESP was an on-board SCSI controller used on Sun 3/80
1454 depends on SBUS && SCSI
1457 This is the driver for the Sun ESP SCSI host adapter. The ESP
1459 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1460 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
1467 depends on S390 && QDIO && SCSI
1470 If you want to access SCSI devices attached to your IBM mainframe by
1486 depends on PCI && SCSI && NET
1493 depends on PCI && SCSI
1501 depends on PCI && SCSI