Lines Matching refs:here
8 Say Y here, and a list of supported touchscreens will be displayed.
19 Say Y here if you have a 88PM860x PMIC and want to enable
24 To compile this driver as a module, choose M here: the
32 Say Y here if you have a touchscreen interface using the
43 To compile this driver as a module, choose M here: the
50 Say Y here if you have a touchscreen interface using the
56 To compile this driver as a module, choose M here: the
62 Say Y here if you want to support a touchscreen interface using
67 To compile this driver as a module, choose M here: the
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
77 To compile this driver as a module, choose M here: the
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
89 To compile this driver as a module, choose M here: the
98 Say Y here if you want to use the generic ADC
103 To compile this driver as a module, choose M here: the
111 Say Y here if you have an ARM Apple device with
116 To compile this driver as a module, choose M here: the
123 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
128 To compile this driver as a module, choose M here: the
136 Say Y here if you have Atmel mXT series I2C touchscreen,
141 To compile this driver as a module, choose M here: the
150 Say Y here if you want support to output data from the T37
158 Say Y here if you have a AUO display with in-cell touchscreen
163 To compile this driver as a module, choose M here: the
170 Say Y here if you have a bu21013 touchscreen connected to
175 To compile this driver as a module, choose M here: the
182 Say Y here if you have a Rohm BU21029 touchscreen controller
187 To compile this driver as a module, choose M here: the
196 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
200 To compile this driver as a module, choose M here: the
207 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
211 To compile this driver as a module, choose M here: the
218 Say Y here if you have a Cypress CY8CTMA140 capacitive
223 To compile this driver as a module, choose M here: the
231 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
236 To compile this driver as a module, choose M here: the
242 Say Y here if you have a touchscreen using controller from
249 To compile this driver as a module, choose M here: the
256 Say Y here if the touchscreen is connected via I2C bus.
258 To compile this driver as a module, choose M here: the
265 Say Y here if the touchscreen is connected via SPI bus.
267 To compile this driver as a module, choose M here: the
279 Say Y here if you have a Cypress Gen5 touchscreen.
283 To compile this driver as a module, choose M here: the
291 Say Y here to enable the support for the touchscreen found
296 To compile this driver as a module, choose M here: the
303 Say Y here to support the touchscreen found on Dialog Semiconductor
308 To compile this driver as a module, choose M here: the
315 Say Y here if you have a Dynapro serial touchscreen connected to
320 To compile this driver as a module, choose M here: the
327 Say Y here if you have a Hampshire serial touchscreen connected to
332 To compile this driver as a module, choose M here: the
339 Say Y here to enable support for I2C connected EETI touch panels.
341 To compile this driver as a module, choose M here: the
348 Say Y here to enable support for I2C connected EETI
351 To compile this driver as a module, choose M here: the
358 Say Y here to enable support for serial connected EETI
361 To compile this driver as a module, choose M here: the
368 Say Y here to enable support for I2C connected EETI
371 To compile this driver as a module, choose M here: the
378 Say Y here if you have the Fujitsu touchscreen (such as one
384 To compile this driver as a module, choose M here: the
392 Say Y here if you have the Goodix touchscreen (such as one
399 To compile this driver as a module, choose M here: the
411 Say Y here if you have a Goodix Berlin IC connected to
416 To compile this driver as a module, choose M here: the
425 Say Y here if you have a Goodix Berlin IC connected to
430 To compile this driver as a module, choose M here: the
438 Say Y here if you have a touchscreen using HiDeep.
442 To compile this driver as a module, choose M here : the
450 Say Y here if you have a touchscreen using Hycon hy46xx
454 To compile this driver as a module, choose M here: the
461 Say Y here if you have a touchscreen using a Hynitron
466 To compile this driver as a module, choose M here: the
474 Say Y here if you have a ILI210X based touchscreen
482 To compile this driver as a module, choose M here: the
489 Say Y here if you have touchscreen with ILITEK touch IC,
494 To compile this driver as a module, choose M here: the
501 Say Y here if you want to add support for the IPROC touch
506 To compile this driver as a module, choose M here: the
517 To compile this driver as module, choose M here: the
524 Say Y here if you have the Gunze AHL-51 touchscreen connected to
529 To compile this driver as a module, choose M here: the
536 Say Y here if you have an Elan eKTF2127 touchscreen
541 To compile this driver as a module, choose M here: the
548 Say Y here if you have an Elan eKTH I2C touchscreen
553 To compile this driver as a module, choose M here: the
560 Say Y here if you have an Elo serial touchscreen connected to
565 To compile this driver as a module, choose M here: the
572 Say Y here if you have an Wacom W8001 penabled serial touchscreen
577 To compile this driver as a module, choose M here: the
584 Say Y here if you want to use the I2C version of the Wacom
589 To compile this driver as a module, choose M here: the module
596 Say Y here if you have a LPC32XX device and want
599 To compile this driver as a module, choose M here: the
606 Say Y here if you have a MAX11801 based touchscreen
611 To compile this driver as a module, choose M here: the
618 Say Y here if you have the MELFAS MMS114 touchscreen controller
623 To compile this driver as a module, choose M here: the
630 Say Y here if you have a MELFAS MIP4 Touchscreen device.
634 To compile this driver as a module, choose M here:
642 Say Y here if you have an I2C touchscreen using MStar msg2638.
646 To compile this driver as a module, choose M here: the
653 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
658 To compile this driver as a module, choose M here: the
665 Say Y here if you have a Novatek NT11205 touchscreen.
668 To compile this driver as a module, choose M here: the
675 Say Y here if you have an Imagis IST30xxC touchscreen.
678 To compile this driver as a module, choose M here: the
685 Say Y here if you have a Freescale i.MX6UL, and want to
690 To compile this driver as a module, choose M here: the
697 Say Y here if you have an iNexio serial touchscreen connected to
702 To compile this driver as a module, choose M here: the
709 Say Y here if you have the ICS MicroClock MK712 touchscreen
714 To compile this driver as a module, choose M here: the
721 Say Y here if you have a HP Jornada 620/660/680/690 and want to
724 To compile this driver as a module, choose M here: the
731 Say Y here if you have a HP Jornada 710/720/728 and want
734 To compile this driver as a module, choose M here: the
741 Say Y here to enable support for the touchscreen attached to
746 To compile this driver as a module, choose M here: the
753 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
758 To compile this driver as a module, choose M here: the
765 Say Y here if you have a Penmount serial touchscreen connected to
770 To compile this driver as a module, choose M here: the
778 Say Y here if you have an EDT "Polytouch" touchscreen based
784 To compile this driver as a module, choose M here: the
791 Say Y here if you have the official Raspberry Pi 7 inch screen on
796 To compile this driver as a module, choose M here: the
803 Say Y here to enable MIGO-R touchscreen support.
807 To compile this driver as a module, choose M here: the
814 Say Y here if you have a Touchright serial touchscreen connected to
819 To compile this driver as a module, choose M here: the
826 Say Y here if you have a Touchwin serial touchscreen connected to
831 To compile this driver as a module, choose M here: the
838 Say Y here if you have 4/5/8 wire touchscreen controller
843 To compile this driver as a module, choose M here: the
850 Say Y here if you have a pixcir i2c touchscreen
855 To compile this driver as a module, choose M here: the
862 Say Y here if you have a Weida WDT87XX I2C touchscreen
867 To compile this driver as a module, choose M here: the
877 To compile this driver as a module, choose M here: the
884 Say Y here if you have a Wolfson Microelectronics WM97xx
891 To compile this driver as a module, choose M here: the
899 Say Y here to enable support for the Wolfson Microelectronics
907 Say Y here to enable support for the Wolfson Microelectronics
915 Say Y here to enable support for the Wolfson Microelectronics
923 Say Y here for support for streaming mode with WM97xx touchscreens
928 To compile this driver as a module, choose M here: the
956 To compile this driver as a module, choose M here: the
963 Say Y here if you have a touchscreen connected to the low-resolution
966 To compile this driver as a module, choose M here: the module will be
975 To compile this driver as a module, choose M here: the
982 Say Y here if you have an Freescale MC13783 PMIC on your
987 To compile this driver as a module, choose M here: the
1080 Say Y here if you have an EasyTouch USB Touch controller.
1087 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1091 To compile this driver as a module, choose M here: the
1100 Say Y here if you have a touchscreen on a TS-4800 board.
1107 To compile this driver as a module, choose M here: the
1114 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1119 To compile this driver as a module, choose M here: the
1131 Say Y here if you have a TSC2004 based touchscreen.
1135 To compile this driver as a module, choose M here: the
1144 Say Y here if you have a TSC2005 based touchscreen.
1148 To compile this driver as a module, choose M here: the
1155 Say Y here if you have a TSC2007 based touchscreen.
1159 To compile this driver as a module, choose M here: the
1167 Saying Y here adds an iio interface to the tsc2007 which
1176 Say Y here if you have a Motorola EZX telephone and
1179 To compile this driver as a module, choose M here: the
1187 Say Y here if you have Raydium series I2C touchscreen,
1192 To compile this driver as a module, choose M here: the
1199 Say Y here if you have the Silead touchscreen connected to
1204 To compile this driver as a module, choose M here: the
1217 To compile this driver as a module, choose M here: the
1224 Say Y here if you want to support the Sitronix ST1232
1229 To compile this driver as a module, choose M here: the
1237 Say Y here if you want support for STMicroelectronics
1240 To compile this driver as a module, choose M here: the
1248 Say Y here if you want support for STMicroelectronics
1251 To compile this driver as a module, choose M here: the
1263 To compile this driver as a module, choose M here: the
1272 Say Y here if you want support for the Samsung SUR40 touchscreen
1275 To compile this driver as a module, choose M here: the
1283 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1288 To compile this driver as a module, choose M here: the
1295 Say Y here if you have a Semtech SX8654 touchscreen controller.
1299 To compile this driver as a module, choose M here: the
1306 Say Y here if you have a TPS6507x based touchscreen
1311 To compile this driver as a module, choose M here: the
1318 Say Y here if you have a touchscreen using Zeitec ZET6223
1322 To compile this driver as a module, choose M here: the
1330 Say Y here if you have a touchscreen using the zforce
1335 To compile this driver as a module, choose M here: the
1343 Say Y here if you have a Colibri VF50 and plan to use
1348 To compile this driver as a module, choose M here: the
1355 Say Y here if you have a touchscreen using ROHM BU21023/24.
1359 To compile this driver as a module, choose M here: the
1369 To compile this driver as a module, choose M here: the
1379 To compile this driver as a module, choose M here: the
1386 Say Y here if you have a touchscreen using Zinitix bt541,
1391 To compile this driver as a module, choose M here: the
1399 Say Y here to enable support for Himax hx83112b touchscreens.
1403 To compile this driver as a module, choose M here: the