Lines Matching refs:code

13 - InitThread message and return code
40 offset 0xa00   for inbound message code message_rwbuffer
42 offset 0xa00   for outbound message code message_rwbuffer
97 			    1   Error, error code in AdapStatus/DevStatus/SenseData
127 9. Message0 message code
133 	->offset 0xa00 :for outbound message code message_rwbuffer
152 	->offset 0xa00 :for inbound message code message_rwbuffer
167 	->offset 0xa00   for inbound message code message_rwbuffer
196 		command code, data and checksum byte
214 		command code
219 	    depends on command code
224 3. Command code and associated data
227 The following are command code defined in raid controller Command
228 code 0x10--0x1? are used for system level management,
231 Command code 0x20--0x?? always check the password,
289 	byte 2            command code 0x10
300 	byte 2            command code 0x11
311 	byte 2            command code 0x12
322 	byte 2            command code 0x13
331 	byte 2            command code 0x14
341 	byte 2            command code 0x15
352 	byte 2            command code 0x17
363 	byte 2            command code 0x18
377 	byte 2            command code 0x19
385 	byte 2            command code 0x1a
394 	byte 2 		  command code 0x1b
419 	byte 2         	  command code 0x20
437 	byte 2            command code 0x20
470 	byte 2            command code 0x21
502 	byte 2            command code 0x22
530 	byte 2            command code 0x23
585 	byte 2            command code 0x24
593 	byte 2            command code 0x30
600 	byte 2            command code 0x31
609 	byte 2 		  command code 0x32
619 	byte 2 		  command code 0x33
628 	byte 2 		  command code 0x34
637 	byte 2 		  command code 0x35
646 	byte 2            command code 0x36
655 	byte 2 		  command code 0x37
673 	byte 2            command code 0x38
681 	byte 2            command code 0x39
691 	byte 2 		  command code 0x40
708 	byte 2 		  command code 0x41
725 	byte 2            command code 0x42
733 	byte 2            command code 0x43
745 	byte 2            command code 0x50
755 	byte 2            command code 0x51
764 	byte 2            command code 0x52
779 	byte 2            command code 0x53
788 	byte 2            command code 0x54
797 	byte 2            command code 0x55
806 	byte 2            command code 0x60
830 	byte 2            command code 0x61
853 	byte 2            command code 0x62
862 	byte 2            command code 0x63
871 	byte 2            command code 0x64
885 	1) If length == 1 ==> 1 byte status code::
904 		and the contents depends on the command code