Lines Matching refs:command

65 be attached on a command prompt as follows::
101 After issuing the "``AT WS``" command, the controller will respond with
130 In command mode, it expects one command per line, terminated by CR.
131 By default, the prompt is a "``>``", after which a command can be
143 When a command is not recognized, such as by an older version of the
155 which the frame is sent as a command that consists of the data's hex
188 the monitoring mode, print "BUFFER FULL" and drop back into command
231   While there is a command (``AT CS``) to retrieve some basic stats,
243   command, and the "listen-only" CAN option will take effect.
248   These chips do not support the "``AT PB``" command, and thus cannot
257   the "``AT D1``" command, which is necessary to avoid parsing conflicts
280 - No evaluation of command responses.
282   The ELM327 will reply with OK when a command is understood, and with ?
284   assumes that the chip understands every command.