385 	DEBUGOUT("Programming MAC Address into RAR[0]\n");  in e1000_init_rx_addrs_generic()
433 		DEBUGOUT("NVM Read Error\n");  in e1000_check_alt_mac_addr_generic()
453 			DEBUGOUT("NVM Read Error\n");  in e1000_check_alt_mac_addr_generic()
463 		DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n");  in e1000_check_alt_mac_addr_generic()
769 		DEBUGOUT("Error configuring flow control\n");  in e1000_check_for_copper_link_generic()
809 		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");  in e1000_check_for_fiber_link_generic()
822 			DEBUGOUT("Error configuring flow control\n");  in e1000_check_for_fiber_link_generic()
831 		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");  in e1000_check_for_fiber_link_generic()
874 		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");  in e1000_check_for_serdes_link_generic()
887 			DEBUGOUT("Error configuring flow control\n");  in e1000_check_for_serdes_link_generic()
896 		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");  in e1000_check_for_serdes_link_generic()
912 				DEBUGOUT("SERDES: Link up - forced.\n");  in e1000_check_for_serdes_link_generic()
916 			DEBUGOUT("SERDES: Link down - force failed.\n");  in e1000_check_for_serdes_link_generic()
929 					DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n");  in e1000_check_for_serdes_link_generic()
932 					DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n");  in e1000_check_for_serdes_link_generic()
936 				DEBUGOUT("SERDES: Link down - no sync.\n");  in e1000_check_for_serdes_link_generic()
940 			DEBUGOUT("SERDES: Link down - autoneg failed\n");  in e1000_check_for_serdes_link_generic()
984 		DEBUGOUT("NVM Read Error\n");  in e1000_set_default_fc_generic()
1048 	DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");  in e1000_setup_link_generic()
1116 		DEBUGOUT("Flow control param set incorrectly\n");  in e1000_commit_fc_settings_generic()
1155 		DEBUGOUT("Never got a valid link from auto-neg!!!\n");  in e1000_poll_fiber_serdes_link_generic()
1164 			DEBUGOUT("Error while checking for link\n");  in e1000_poll_fiber_serdes_link_generic()
1170 		DEBUGOUT("Valid Link Found\n");  in e1000_poll_fiber_serdes_link_generic()
1207 	DEBUGOUT("Auto-negotiation enabled\n");  in e1000_setup_fiber_serdes_link_generic()
1221 		DEBUGOUT("No signal detected\n");  in e1000_setup_fiber_serdes_link_generic()
1339 		DEBUGOUT("Flow control param set incorrectly\n");  in e1000_force_mac_fc_generic()
1382 		DEBUGOUT("Error forcing flow control settings\n");  in e1000_config_fc_after_link_up_generic()
1404 			DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");  in e1000_config_fc_after_link_up_generic()
1466 				DEBUGOUT("Flow Control = FULL.\n");  in e1000_config_fc_after_link_up_generic()
1469 				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");  in e1000_config_fc_after_link_up_generic()
1484 			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");  in e1000_config_fc_after_link_up_generic()
1498 			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");  in e1000_config_fc_after_link_up_generic()
1504 			DEBUGOUT("Flow Control = NONE.\n");  in e1000_config_fc_after_link_up_generic()
1513 			DEBUGOUT("Error getting link speed and duplex\n");  in e1000_config_fc_after_link_up_generic()
1525 			DEBUGOUT("Error forcing flow control settings\n");  in e1000_config_fc_after_link_up_generic()
1543 			DEBUGOUT("PCS Auto Neg has not completed.\n");  in e1000_config_fc_after_link_up_generic()
1599 				DEBUGOUT("Flow Control = FULL.\n");  in e1000_config_fc_after_link_up_generic()
1602 				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");  in e1000_config_fc_after_link_up_generic()
1617 			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");  in e1000_config_fc_after_link_up_generic()
1631 			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");  in e1000_config_fc_after_link_up_generic()
1637 			DEBUGOUT("Flow Control = NONE.\n");  in e1000_config_fc_after_link_up_generic()
1649 			DEBUGOUT("Error forcing flow control settings\n");  in e1000_config_fc_after_link_up_generic()
1676 		DEBUGOUT("1000 Mbs, ");  in e1000_get_speed_and_duplex_copper_generic()
1679 		DEBUGOUT("100 Mbs, ");  in e1000_get_speed_and_duplex_copper_generic()
1682 		DEBUGOUT("10 Mbs, ");  in e1000_get_speed_and_duplex_copper_generic()
1687 		DEBUGOUT("Full Duplex\n");  in e1000_get_speed_and_duplex_copper_generic()
1690 		DEBUGOUT("Half Duplex\n");  in e1000_get_speed_and_duplex_copper_generic()
1736 		DEBUGOUT("Auto read by HW from NVM has not completed.\n");  in e1000_get_auto_rd_done_generic()
1759 		DEBUGOUT("NVM Read Error\n");  in e1000_valid_led_default_generic()
2046 		DEBUGOUT("Master requests are pending.\n");  in e1000_disable_pcie_master_generic()
2066 		DEBUGOUT("Not in Adaptive IFS mode!\n");  in e1000_reset_adaptive_generic()
2094 		DEBUGOUT("Not in Adaptive IFS mode!\n");  in e1000_update_adaptive_generic()
2133 		DEBUGOUT("Invalid MDI setting detected\n");  in e1000_validate_mdi_setting_generic()
2230 		DEBUGOUT("Driver can't access device - SMBI bit is set.\n");  in e1000_get_hw_semaphore()
2264 		DEBUGOUT("Driver can't access the NVM\n");  in e1000_get_hw_semaphore()
2330 		DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");  in e1000_acquire_swfw_sync()