Lines Matching refs:axgbe_printf
482 axgbe_printf(3, "%s: target 0x%x reg_len %d val_len %d\n", __func__, in xgbe_phy_i2c_read()
492 axgbe_printf(3, "%s: ret1 %d retry %d\n", __func__, ret, retry); in xgbe_phy_i2c_read()
508 axgbe_printf(3, "%s: ret2 %d retry %d\n", __func__, ret, retry); in xgbe_phy_i2c_read()
652 axgbe_printf(3, "%s: addr %d reg %d val %#x\n", __func__, addr, reg, val); in xgbe_phy_mii_write()
714 axgbe_printf(3, "%s: addr %d reg %d\n", __func__, addr, reg); in xgbe_phy_mii_read()
832 axgbe_printf(1, "%s: link speed %d spf_base 0x%x pause_autoneg %d " in xgbe_phy_sfp_phy_settings()
896 axgbe_printf(3, "Finisar PHY quirk in place\n"); in xgbe_phy_finisar_phy_quirks()
967 axgbe_printf(3, "BelFuse PHY quirk in place\n"); in xgbe_phy_belfuse_phy_quirks()
1006 axgbe_printf(2, "%s: phy_id1: 0x%x phy_id2: 0x%x oui: %#x model %#x\n", in xgbe_get_phy_id()
1061 axgbe_printf(2, "%s: phydev %d phydev_mode %d sfp_phy_avail %d phy_id " in xgbe_phy_find_phy_device()
1067 axgbe_printf(3, "%s: phy present already\n", __func__); in xgbe_phy_find_phy_device()
1076 axgbe_printf(3, "%s: phydev_mode %d\n", __func__, in xgbe_phy_find_phy_device()
1084 axgbe_printf(3, "%s: port_mode %d avail %d\n", __func__, in xgbe_phy_find_phy_device()
1101 axgbe_printf(2, "Get phy_id 0x%08x\n", phy_data->phy_id); in xgbe_phy_find_phy_device()
1116 axgbe_printf(3, "%s: sfp_changed: 0x%x\n", __func__, in xgbe_phy_sfp_external_phy()
1135 axgbe_printf(3, "Successfully accessed External PHY\n"); in xgbe_phy_sfp_external_phy()
1259 axgbe_printf(3, "%s: sfp_base: 0x%x sfp_speed: 0x%x sfp_cable: 0x%x " in xgbe_phy_sfp_parse_eeprom()
1272 axgbe_printf(3, "SFP detected:\n"); in xgbe_phy_sfp_eeprom_info()
1276 axgbe_printf(3, " vendor: %s\n", in xgbe_phy_sfp_eeprom_info()
1282 axgbe_printf(3, " part number: %s\n", in xgbe_phy_sfp_eeprom_info()
1288 axgbe_printf(3, " revision level: %s\n", in xgbe_phy_sfp_eeprom_info()
1294 axgbe_printf(3, " serial number: %s\n", in xgbe_phy_sfp_eeprom_info()
1312 axgbe_printf(3, "sfp_base[XGBE_SFP_BASE_ID] : 0x%04x\n", in dump_sfp_eeprom()
1314 axgbe_printf(3, "sfp_base[XGBE_SFP_BASE_EXT_ID] : 0x%04x\n", in dump_sfp_eeprom()
1316 axgbe_printf(3, "sfp_base[XGBE_SFP_BASE_CABLE] : 0x%04x\n", in dump_sfp_eeprom()
1390 axgbe_printf(3, "%s: befor sfp_mod:%d sfp_gpio_address:0x%x\n", in xgbe_phy_sfp_signals()
1406 axgbe_printf(0, "%s: port_sfp_inputs: 0x%0x\n", __func__, in xgbe_phy_sfp_signals()
1411 axgbe_printf(3, "%s: after sfp_mod:%d sfp_gpio_inputs:0x%x\n", in xgbe_phy_sfp_signals()
1476 axgbe_printf(3, "%s: phy speed: 0x%x duplex: 0x%x autoneg: 0x%x " in xgbe_phy_sfp_detect()
1582 axgbe_printf(1, "%s: pause tx/rx %d/%d\n", __func__, in xgbe_phy_phydev_flowctrl()
1594 axgbe_printf(1, "%s: pause_autoneg %d\n", __func__, in xgbe_phy_an37_sgmii_outcome()
1646 axgbe_printf(1, "%s: pause_autoneg %d ad_reg 0x%x lp_reg 0x%x\n", in xgbe_phy_an37_outcome()
1665 axgbe_printf(1, "%s: pause tx/rx %d/%d\n", __func__, pdata->phy.tx_pause, in xgbe_phy_an37_outcome()
1688 axgbe_printf(1, "%s: pause_autoneg %d\n", __func__, in xgbe_phy_an73_redrv_outcome()
1776 axgbe_printf(1, "%s: pause_autoneg %d ad_reg 0x%x lp_reg 0x%x\n", in xgbe_phy_an73_outcome()
1795 axgbe_printf(1, "%s: pause tx/rx %d/%d\n", __func__, pdata->phy.tx_pause, in xgbe_phy_an73_outcome()
1910 axgbe_printf(2, "%s: find_phy_device return %s.\n", __func__, in xgbe_phy_an_config()
2016 axgbe_printf(2, "%s: redrv_if set: %d\n", __func__, phy_data->redrv_if); in xgbe_phy_set_redrv_mode()
2049 axgbe_printf(3, "%s: Rate change done\n", __func__); in xgbe_phy_perform_ratechange()
2056 axgbe_printf(3, "firmware mailbox command did not complete\n"); in xgbe_phy_perform_ratechange()
2065 axgbe_printf(3, "receiver reset complete\n"); in xgbe_phy_rrc()
2078 axgbe_printf(3, "phy powered off\n"); in xgbe_phy_power_off()
2089 axgbe_printf(3, "%s: cable %d len %d\n", __func__, phy_data->sfp_cable, in xgbe_phy_sfi_mode()
2105 axgbe_printf(3, "10GbE SFI mode set\n"); in xgbe_phy_sfi_mode()
2120 axgbe_printf(3, "1GbE X mode set\n"); in xgbe_phy_x_mode()
2135 axgbe_printf(2, "1GbE SGMII mode set\n"); in xgbe_phy_sgmii_1000_mode()
2150 axgbe_printf(3, "100MbE SGMII mode set\n"); in xgbe_phy_sgmii_100_mode()
2165 axgbe_printf(3, "10GbE KR mode set\n"); in xgbe_phy_kr_mode()
2180 axgbe_printf(3, "2.5GbE KX mode set\n"); in xgbe_phy_kx_2500_mode()
2195 axgbe_printf(3, "1GbE KX mode set\n"); in xgbe_phy_kx_1000_mode()
2445 axgbe_printf(1, "Unknown mode detected\n"); in xgbe_phy_get_type()
2488 axgbe_printf(3, "%s: check mode %d\n", __func__, mode); in xgbe_phy_use_baset_mode()
2582 axgbe_printf(3, "use_mode %s\n", in xgbe_phy_use_mode()
2699 axgbe_printf(2, "%s: Link %d\n", __func__, pdata->phy.link); in xgbe_upd_link()
2709 axgbe_printf(2, "Link: %d updated reg %#x\n", pdata->phy.link, reg); in xgbe_upd_link()
2724 axgbe_printf(2, "Link Update return %d\n", ret); in xgbe_phy_read_status()
2743 axgbe_printf(2, "Master/Slave Resolution " in xgbe_phy_read_status()
2746 axgbe_printf(2, "Master/Slave Resolution failed\n"); in xgbe_phy_read_status()
2776 axgbe_printf(2, "%s: lpa %#x adv %#x common_adv_gb %#x " in xgbe_phy_read_status()
2780 axgbe_printf(2, "%s: SPEED 1000\n", __func__); in xgbe_phy_read_status()
2786 axgbe_printf(2, "%s: SPEED 100\n", __func__); in xgbe_phy_read_status()
2818 axgbe_printf(2, "%s: link speed %#x duplex %#x media %#x " in xgbe_phy_read_status()
2838 axgbe_printf(3, "%s: calling phy detect\n", __func__); in xgbe_phy_link_status()
2842 axgbe_printf(1, "%s: SFP changed observed\n", __func__); in xgbe_phy_link_status()
2848 axgbe_printf(1, "%s: SFP absent 0x%x & sfp_rx_los 0x%x\n", in xgbe_phy_link_status()
2859 axgbe_printf(2, "Link: Read status returned %d\n", ret); in xgbe_phy_link_status()
2863 axgbe_printf(2, "%s: link speed %#x duplex %#x media %#x " in xgbe_phy_link_status()
2868 axgbe_printf(2, "Link: BMCR returned %d\n", ret); in xgbe_phy_link_status()
2880 axgbe_printf(1, "%s: link_status reg: 0x%x\n", __func__, reg); in xgbe_phy_link_status()
2886 axgbe_printf(1, "ENTERED RRC: rrc_count: %d\n", in xgbe_phy_link_status()
3195 axgbe_printf(2, "%s: an_cdr_workaround %d phy_cdr_notrack %d\n", in xgbe_phy_cdr_track()
3211 axgbe_printf(2, "CDR TRACK DONE\n"); in xgbe_phy_cdr_track()
3219 axgbe_printf(2, "%s: an_cdr_workaround %d phy_cdr_notrack %d\n", in xgbe_phy_cdr_notrack()
3326 axgbe_printf(2, "%s: redrv %d redrv_if %d start_mode %d\n", __func__, in xgbe_phy_start()
3356 axgbe_printf(3, "%s: calling phy detect\n", __func__); in xgbe_phy_start()
3370 axgbe_printf(3, "%s: impl return success\n", __func__); in xgbe_phy_start()
3391 axgbe_printf(3, "%s: mode %d\n", __func__, cur_mode); in xgbe_phy_reset()
3393 axgbe_printf(1, "%s: no phydev\n", __func__); in xgbe_phy_reset()
3404 axgbe_printf(3, "%s: return success\n", __func__); in xgbe_phy_reset()
3419 axgbe_printf(2, "%s: Invoked\n", __func__); in axgbe_ifmedia_sts()
3422 axgbe_printf(2, "%s: media_active %#x media_status %#x\n", __func__, in axgbe_ifmedia_sts()
3442 axgbe_printf(2, "%s: Invoked\n", __func__); in axgbe_ifmedia_upd()
3697 axgbe_printf(2, "%s: start %d mode %d adv 0x%x\n", __func__, in xgbe_phy_init()
3732 axgbe_printf(2, "mii attach failed with err=(%d)\n", ret); in xgbe_phy_init()