Lines Matching refs:code
333 Avoid triggering an assertion in the OpenLDAP code when the
412 If a milter sets the reply code to "421" during the transfer
520 A code change in Cyrus-SASL 2.1.22 for sasl_decode64() requires
769 LIBMILTER: A new return code SMFIS_NOREPLY has been added which
772 LIBMILTER: The new return code SMFIS_SKIP can be used in the
797 LIBMILTER: If a milter sets the reply code to "421" for the HELO
869 Most of those code places are marked with lint(1) comments
896 layer and fix problems in that code. Also fix handling of
911 If a server returns a 5xy error code (other than 501) in response
913 STARTTLS and that the code is not valid according to RFC
936 -1 and set errno instead of returning an error code
979 source code.
988 Some features still used 4.7.1 as enhanced status code which
1068 SMTP reply code. Problem noted by Mark Tranchant.
1151 Fix a 64 bit problem in the socket map code. Problem
1220 Do not use 4.7.1 as enhanced status code because some broken systems
1266 A new error code for the $#error mailer, $@ quarantine, can be used
1379 If check_relay sets the reply code to "421" the SMTP server will
1381 Get rid of dead code that tried to access the environment variable
1506 Found by code inspection done by Reasoning, Inc.
1513 LIBMILTER: If a milter sets the reply code to "421", the SMTP server
1610 examples where the new code fails, but the old code works.
1614 Return normal error code for unknown SMTP commands instead of
1640 to libmilter. Based on code review by Rob Grzywinski.
1683 CONFIG: Use specified SMTP error code in mailertable entries which
1782 When converting an enhanced status code to an exit status, use
2016 Change SMTP reply code for AUTH failure from 500 to 535 and the
2152 Fix class map parsing code if optional key is specified. Problem
2173 Change the SMTP error code for temporary map failures from 421
2178 Initialize Timeout.iconnect in the code to prevent randomly short
2246 LIBMILTER: If smfi_setreply() sets a custom reply code of '4XX' but
2411 example code. Problem noted by Nikos Voutsinas of the
2540 types can be added by adding custom code to libsm/mbdb.c.
2570 Accept any SMTP continuation code 3xy for AUTH even though RFC 2554
2611 Add parallel queue runner code. Allows multiple queue runners per work
2720 PH map code updated to use the new libphclient API instead of the
2759 Sfio no longer needed as SASL/TLS code uses sm_io*() API's.
2785 i.e., the corresponding code is always compiled in now.
2992 in the access map. Based on code contributed by Mathias
3332 CONFIG: Undo change from 8.11.1: change 501 SMTP reply code back
3585 Fix a bug in the PH_MAP code which caused mail to bounce instead of
3590 Change error code for unrecognized parameters to the SMTP MAIL and
3621 CONFIG: Change 553 SMTP reply code to 501 to avoid problems with
3682 support encryption. Based on code contributed by Tim
3717 Use SMTP error code and enhanced status code from check_relay in
3756 Fixup the GID checking code from 8.10.2 as it was overly
3781 Replace code for finding the number of CPUs on HPUX.
4039 for easier code sharing among the programs.
4045 supplied). Based on code contributed by Tim Martin of CMU.
4309 Resolving to the $#error mailer with a temporary failure code (e.g.,
4337 local users in the passwd file. The UserDB code has
4451 Log the DSN code for each recipient if one is available as a new
4682 response code and drops the connection. This behavior was
5018 where "D.S.N" is an RFC 1893 compliant error code.
5181 code contributed by Roy Mongiovi of Georgia Tech.
5333 Accept any 3xx reply code in response to DATA command instead of
5609 5.3.4 DSN status code instead of 5.2.2. Similarly, for
5876 exit code of 79. Problem noted by Aaron Schrab of ExecPC
5924 Accept SMTP replies which contain only a reply code and no
5946 IRIX 6.X load average code from Bob Mende of SGI.
6538 Change SMTP status code 553 to map into Extended code 5.1.0 (instead
6640 Neil Shapiro. This change makes the code match the O'Reilly
6733 change to the sendmail map code was made in 8.8.3. Problem
6769 SECURITY: Fix buffer overrun problem in MIME code that has possible
6786 _Really_ fix the multiple :maildrop code in the user database
6854 Give better diagnostics on long alias lines. Based on code contributed
6949 status code. Problem noted by Don Lewis.
6966 Several patches to signal handling code to fix potential race
7034 Improvements to MaxDaemonChildren code. If you think you have too
7042 O_EXLOCK to zero; this fools the map compilation code into
7050 Improvements to host status printing code. Suggested by Steve Hubert
7120 changed the code but didn't fix the problem.
7171 CONFIG: ``error:code message'' syntax was broken in virtusertable.
7276 NetInfo property value searching code wasn't stopping when it found
7420 macro. Based on code contributed by Mark Lovell and Paul
7428 only for debugging deep bits of code where it is important to
7507 5yz (permanent failure) code. The next MX host will still be
7509 or if the MAIL command returns a 4yz (temporary failure) code.
7551 file descriptors. Based on the persistent host status code
7642 On DEC OSF/1 3.2 and earlier, the MatchGECOS code would only
7679 NEXTSTEP 3.x code changes from Allan J. Nathanson of NeXT.
7690 CONFIG: allow mailertables to resolve to ``error:code message''
7691 (where "code" is an exit status) on domains (previously
7714 just when to use which one may be tricky. Based on code
7772 CONTRIB: Remove XLA code at the request of the author, Christophe
7850 Fix botch in name server timeout in RCPT code; this problem caused
7972 Extensive cleanups to map open code to handle a locking race condition
8063 kernel provides). Based on code contributed by J.R. Oldroyd
8355 as the group. Based on code donated by Chip Rosenthal of
8382 something like PPP on a 14.4 modem. Based on code
8387 UUNET; closely based on code from KJS DECWRL code written
8428 default map is "/aliases". Some code based on code
8505 on code contributed by Dan Oscarsson.
8705 merge with DSN code; this is simpler and more consistent.
8787 Allow the error mailer to accept a DSN-style error status code
8788 instead of an sysexits status code in the host part.
8789 Anything with a dot will be interpreted as a DSN-style code.
8839 be handled in a single queue run. Based on code contributed
8924 site where that SMTP site returned a 4yz code in response
8956 This requires adaptation of code that really
8974 emulation code doesn't realize that "getpeername"
8989 SCO Unix from Chip Rosenthal of Unicom (code was using the
8999 their merged code was licensed back to AT&T and
9076 CONFIG: fix code that was supposed to catch colons in host
9181 Based on code contributed by Claude Marinier.
9183 ``error:code message''. The ``code'' is a status code
9194 code were contributed by Per Hedeland.
9314 Fix to IDENT code (it was getting the size of the reply buffer
9399 some of the map code.
9420 sendmail -bs from inetd. Based on code contributed by
9433 code was contributed by Eric Wassenaar.
9486 connection and give a 421 code, but that could break
9690 This was in code intended to only catch the self-literal
9692 IP address), but the code was broken. However, it will
9827 code associated with it -- previously it returned OK
9880 Fix based on code from Roland Dirlewanger of
9883 code during some parts of connection initialization.
9956 Fix the code that was intended to allow two users to forward their
10002 CONFIG: add uucp-uudom mailer variant, based on code posted
10067 not clear this code even does anything. From Eric
10137 Under very odd circumstances, the alias file rebuild code
10140 Check "vendor code" on the end of V lines -- this is
10327 called, the code to recover the descriptor was broken.
10505 fallback to yourself -- most of the code was there,
10509 code EOPENTIMEOUT; this avoids adding "during SmtpPhase
10558 things like the "short circuit" code for local addresses.
10645 message would ever be sent back. The timeout code
10669 Change map code to set the "include null" flag adaptively --