Lines Matching refs:outer

1033 Set the inner or outer VLAN TPID for packet filtering on a port::
1035    testpmd> vlan set (inner|outer) tpid (value) (port_id)
1100 Or, set double VLAN ID (inner: 2, outer: 3) insertion on port 1::
1125    testpmd> csum set (ip|udp|tcp|sctp|outer-ip|outer-udp) (hw|sw) (port_id)
1131 * ``outer-ip`` relates to the outer IP layer (only for IPv4) in the case where the packet is recogn…
1135 * ``outer-udp`` relates to the outer UDP layer in the case where the packet is recognized
1213   ``outer-ip|outer-udp`` parameter relates to the outer headers (here ``ipv4_out`` and ``udp_out``).
1216    command relate to the outer headers, here ``ipv4_out`` and ``udp_out``.
1825 Config VXLAN Encap outer layers
1828 Configure the outer layer to encapsulate a packet inside a VXLAN tunnel::
1847 Config NVGRE Encap outer layers
1850 Configure the outer layer to encapsulate a packet inside a NVGRE tunnel::
1889 Config MPLSoGRE Encap outer layers
1892 Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel::
1905 Config MPLSoGRE Decap outer layers
1908 Configure the outer layer to decapsulate MPLSoGRE packet::
1918 Config MPLSoUDP Encap outer layers
1921 Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
1935 Config MPLSoUDP Decap outer layers
1938 Configure the outer layer to decapsulate MPLSoUDP packet::
3923 - ``vxlan_encap``: Performs a VXLAN encapsulation, outer layer configuration
3924   is done through `Config VXLAN Encap outer layers`_.
3929 - ``nvgre_encap``: Performs a NVGRE encapsulation, outer layer configuration
3930   is done through `Config NVGRE Encap outer layers`_.
3941 - ``mplsogre_encap``: Performs a MPLSoGRE encapsulation, outer layer
3942   configuration is done through `Config MPLSoGRE Encap outer layers`_.
3944 - ``mplsogre_decap``: Performs a MPLSoGRE decapsulation, outer layer
3945   configuration is done through `Config MPLSoGRE Decap outer layers`_.
3947 - ``mplsoudp_encap``: Performs a MPLSoUDP encapsulation, outer layer
3948   configuration is done through `Config MPLSoUDP Encap outer layers`_.
3950 - ``mplsoudp_decap``: Performs a MPLSoUDP decapsulation, outer layer
3951   configuration is done through `Config MPLSoUDP Decap outer layers`_.
4431 The above command sets the inner and outer TPID's to 0x8100.
4435    testpmd> vlan set outer tpid 0xa100 0
4518 VXLAN encapsulation outer layer has default value pre-configured in testpmd
4521 IPv4 VXLAN outer header::
4540 IPv6 VXLAN outer header::
4562 NVGRE encapsulation outer layer has default value pre-configured in testpmd
4565 IPv4 NVGRE outer header::
4578 IPv6 NVGRE outer header::
4631 MPLSoGRE encapsulation outer layer has default value pre-configured in testpmd
4634 IPv4 MPLSoGRE outer header::
4642 IPv4 MPLSoGRE with VLAN outer header::
4650 IPv6 MPLSoGRE outer header::
4658 IPv6 MPLSoGRE with VLAN outer header::
4669 MPLSoGRE decapsulation outer layer has default value pre-configured in testpmd
4672 IPv4 MPLSoGRE outer header::
4678 IPv4 MPLSoGRE with VLAN outer header::
4684 IPv6 MPLSoGRE outer header::
4690 IPv6 MPLSoGRE with VLAN outer header::
4699 MPLSoUDP encapsulation outer layer has default value pre-configured in testpmd
4702 IPv4 MPLSoUDP outer header::
4710 IPv4 MPLSoUDP with VLAN outer header::
4718 IPv6 MPLSoUDP outer header::
4726 IPv6 MPLSoUDP with VLAN outer header::
4737 MPLSoUDP decapsulation outer layer has default value pre-configured in testpmd
4740 IPv4 MPLSoUDP outer header::
4746 IPv4 MPLSoUDP with VLAN outer header::
4752 IPv6 MPLSoUDP outer header::
4758 IPv6 MPLSoUDP with VLAN outer header::