Lines Matching refs:bbdev

57 The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
222       "Failed to configure 4G FPGA PF for bbdev %s",
229 BBDEV provides a test application, ``test-bbdev.py`` and range of test data for testing
231 capabilities. The test application is located under app->test-bbdev folder and has the
236   "-p", "--testapp-path": specifies path to the bbdev test app.
240 …"-v", "--test-vector"	: Test vector path (default=dpdk_path+/app/test-bbdev/test_vectors/bbdev_nul…
252   ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data
253   ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data
256 The test application ``test-bbdev.py``, supports the ability to configure the PF device with
272 In addition to the simple LDPC decoder and LDPC encoder tests, bbdev also provides
280 On top of the embedded configuration feature supported in test-bbdev using "- -init-device"
283 The ``pf_bb_config`` application notably enables then to run bbdev-test from the VF
293 …./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_defaul…