Lines Matching refs:secondary

75 To run the secondary process to communicate with the primary process,
80     ./<build_dir>/examples/dpdk-simple_mp -l 2-3 -n 4 --proc-type=secondary
82 When running a secondary process such as that shown above, the proc-type parameter can again be spe…
83 …eter altogether will cause the process to try and start as a primary rather than secondary process.
103 …If the primary instance is terminated, the secondary instance must also be shut-down and restarted…
105     invalidating the secondary process's pointers.
106     The secondary process can be stopped and restarted without affecting the primary process.
113 since the secondary process cannot create objects in memory as it cannot reserve memory zones,
114 and the secondary process then uses lookup functions to attach to these objects as it starts up.
122 … ring structure used as send_ring in the primary process is the recv_ring in the secondary process.
124 Once the rings and memory pools are all available in both the primary and secondary processes,
171 The secondary symmetric_mp instances must also have these parameters specified,
187 …In the above example, the process type can be explicitly specified as primary or secondary, rather…
196     Instead, that process can be restarted as a secondary,
197     by explicitly setting the proc-type to secondary on the command line.
204 The initialization calls in both the primary and secondary instances are the same for the most part,
206 …nitialization done depends on whether the process is configured as a primary or secondary instance.
211 therefore will be accessible by the secondary process as it initializes.
219 In the secondary instance, rather than initializing the network ports, the port information exporte…
220 giving the secondary process access to the hardware and software rings for each network port.
227 Once this initialization is complete, the main loop of each process, both primary and secondary,
282     as there is no support in the server application for it to run as a secondary process.
294 the client processes are designed to be run as secondary instances only.